COOL-CARE®
180 watt
The COOL-CARE® can be used without a controller for cooling secondary condensers on membrane pumps.
The COOL-CARE® operates on the same principle as a recirculating chiller. A refrigeration unit cools the circulating water or antifreeze mixture in a small container, from where a circulation pump supplies the coolant to the equipment to be cooled. Easy access is available on the top of the unit for filling the container. The lid can be screwed on.
For applications in which maintaining the temperature constant within a specific range is more important than saving water, the COOL-CARE® is available with a small heater.
A wear-resistant microprocessor-controlled unit regulates a container heater and ensures very precise water outlet temperatures. A feed pump with a maximum pressure of up to 0.4 bar is available.
A more powerful pump can be optionally fitted to provide a lower temperature range (down to 0 °C) and greater stability (± 0.2 °C).
Would you like more information about this recirculating chiller? We would be pleased to advise you!
Tel.: +41 (0) 44 822 31 71 E-Mail: info@mlt.chAPPLICATION EXAMPLES, FUNCTIONS AND
ADVANTAGES AND TECHNICAL DATA
APPLICATION EXAMPLES
- HPLC
- Electrophoresis
- Rotary evaporators
- Destillation devices
- Soxhlet extractions
- Water baths
- Small cooling equipment demands
FUNCTIONS AND ADVANTAGES
- 100% water savings in tap water
- No sewage costs for waste water
- Cooling water temperature, pressure and flow can be regulated
- Constant water quality, no limescale, no algae
- Minimum space requirement on every laboratory table
- Compact 1.6 litre tank
- Almost silent in operation
- Exceptionally easy to use
- Ambient temperature up to 28°C
- Available with higher pump pressure and a lower temperature range
- Power regulation by microprocessor controlled heating, this means high temperature stability of water pre-run temperature optional (0.2 K/°C)
TECHNICAL DATA
- Temperatur range: 5° bis 25° C
- Cooling power @ 20° C: 180 Watt
- Pump capacity max.: 10/28 l/min
- Feed pressure max.: 0,15/0,4 bar
- Connections: Quick lock 9 mm
- Dimensions (W × D × H): 290 × 450 × 270 mm
- Voltage (to 2000 Watt): 230 V/50 Hz/1 PH
- Weight: 15 kg
- Refrigerant: R134a